ThermaCoverTM is a permeable floating cover system that provides effective odor and air emissions control for manure storage structures, waste retention ponds and other odorous lagoons. ThermaCoverTM’s unique design allows rainwater to pass through the cover while scrubbing the odorous gases—eliminating the sizable cost and maintenance of collecting and pumping these substances. Additional benefits include insulating properties to aid in the anaerobic process, blockage of sunlight to prevent and halt algae growth, and a tenfold reduction in the loss of water due to evaporation. Previously, the only available permeable covers to offer an aerobic environment were made from straw, peat-moss or similar organic materials. However, these materials lack proper buoyancy, structural integrity, vulnerable to wind, rain, hail and even fire damage.


ThermaCoverTM permeable floating cover systems are easy to install and maintain. It can be installed to travel up and down as water levels change. Sample ports and hatches are safely and easily accessible by using walkways on the surface of the cover. A cover weight system is not needed, as winds cannot lift the cover off the surface of the water. Instead, a simple anchor system at the perimeter can be used.



  • Permeable, which prevents the build-up of rainwater, so no pumps are required
  • Reduces the evaporation rate by over 99%
  • Eliminates algae and odor emissions
  • Prevents contamination from airborne debris
  • Reduces wave impact
  • Light, flexible and easy to install
  • Environmentally-friendly
  • Long-Life, as PEX material is impervious to most chemicals and retains its properties in temperatures ranging from -50 C to +65 C
  • Custom roll lengths available























EcoIsland™ floating treatment system has proven to be an effective and low-cost aquatic bed for emergent or wet meadow plants in a variety of environmental applications including storm sewer reservoirs, agriculture, mining, pulp and paper wastewater treatment, pollutant reduction in lakes, pond or rivers, fish habitat for fishing, water flow habitat, and water garden landscaping. Highly adaptable, our Ecolsland™ can be retro-fitted into existing facilities or incorporated into the design of new constructions. The islands can also be installed in open water, along banks or confined areas, as they can operating in fluctuating water levels.



  • Removes biodegradable organic matter, nitrogen, and waste water
  • Impervious to chemicals
  • Structurally strong, yet flexible
  • Retains properties at sub-zero temperature
  • High Vertical and Horizontal Drainage
  • Significantly reduces concentration levels of contaminants in storm water and run-off ponds
  • Provides nesting/spawning habitat for fish, birds and other species
  • Reduction of wave impact
  • Prevention of thermal pollution
  • Easy and quick installation
  • Environmentally-friendly
  • Long lifespan with little to no maintenance























Building Foundations

Water proofing of basements and foundation walls is only half the solution when it comes to keeping these areas dry and leak proof. Foundation walls should have complete draining systems in place to relieve the hydrostatic pressure in order to extend the life of the waterproofing membrane, regardless of the source of the moisture. This issue can also be compounded by the damage caused by backfilling operations. ThermaGreen offers the complete solution to these problems with our drainage and insulation boards. These drainage boards are lighter, provide faster drainage rates while also protecting against damage caused by backfilling operations. Our drainage boards come with a non-woven geotextile that is physically bonded to one side, preventing fine particles from entering and causing clogging. Additionally, our product acts as insulation to below grade living space, keeping basements warmer and dry. R-Values are typically R-3.85 per inch, whether saturated or dry. Besides the energy savings and improved interior comfort, Thermagreen drainage boards reduce the risk of mold and condensation on cold basement walls.



  • Protects waterproofing membrane against backfilling operation
  • Removes groundwater
  • Prevents build-up of hydrostatic pressure
  • Acts as thermal insulation
  • Quick and easy installation – light, flexible and easy to cut
  • Time saving (one product for two applications)
  • Qualifies for LEED, as our product is made from recycled materials
  • Environmentally-friendly, as it is made from inert material and does not leachout
  • Long lifespan


All contents Copyright © 2015–2017 INOVA Geosynthetics. All rights reserved.

Submitting Request...

There was an error! Please try again.

Thank you for signing up!